Friday, January 29, 2021

More Light in the back

Need to look out the back but not let peepers look in. 











Looking OK me thinks

Box the Truma

More router work, well I need the practice. I need to have a rebate to locate between the legs of the main chair and the raised floor. Thanks to Gerg Virgoe i just had to go for the Sobrano.


Now you  can see the need, the need for routing a rebate





















Nice air circulation for the truma 4e boiler.










need to find a nice black cover for the seat belt anchor bolt.

Thursday, December 31, 2020

Electrickary

 Mock up wheel arch box to hold all the electrics. 




Finished design, 850 long shelf sitting in sides 450 x 650 tall.




240 consumer unit for hook up. Feed in first.















The second connection is 16Amp to the Truma 4e.























Second 16Amp fuse for 2 or 3 sockets.



Now for the 12v side, I fancy having the 12v fuse box set on some nice base up off the shelf so I can tuck in the wire underneath. 
First wire is the thick one for the fridge.
Earth top and live to the bottom these are the feed from the leisure  batt plan is 300AH lithium.
So far Fridge, Truma and kitchen CIG lighter socket on the RH and on the LH roof lights, rear Maxx fan

I have only added 5 appliances and realise I only have room for 12 so may have to have 2 12v fuse boxes side by side. I do like to have each one with its own fuse.

At this rate I have more than 12 things to connect. mmmmmm how much will be my daily use. 

  1. Fridge
  2. Front fan
  3. Rear fan 
  4. Truma
  5. Truma control panel 
  6. Celling lights
  7. Bed room reading lights
  8. Toilet
  9. Toilet fan
  10. Toilet light
  11. Front seating lights
  12. leki step
  13. Front USB socket 
  14. Rear USB socket. 








Last

Thursday, December 24, 2020

Great walls of shower

Lets make a template

































Looking good
Transfer to the furniture board





Happy with this side, now on to the rear












Inside template, just add square edge to full 700mm width



Top of the pattern look v good.
Bottom where water hot n cold comes out plus the hot air heating duct. there's a small plastic pipe for the gas to the left of the air duct. 












template for rear wall


































Pocket hole stiffeners to hold until I have the front worked out


Give me some shade

 yawninning  unwrap the beast  tree places the brackets need to sit dry fit to start the measure, measure and measure again. the end of the ...