Monday, July 12, 2021

Give me some shade

 yawninning 


unwrap the beast 
tree places the brackets need to sit
dry fit to start the measure, measure and measure again.



the end of the canopy will end on the rear seam, if all goes to plan.

fit new longer roof rail.
mark holes at 120 enters.
holes for M8.





















test fit, looks good.




slight gap which Sikaflex will fill



new longer top rail fitted and position of first bracket.


measure, check and measure again  






the holes are off set.

bolted on and secure
wrap up to save van and awning from scratching  

lift up slowly with 4 ratchet straps. 










turn to align brackets




now raise the rail to line up holes

boom bolt up with 2-4 inches gap for room to add Sikaflex










nice gap for the sikaflex






lower on to three 5 inch square pads of Sikaflex and lower rail and tighten up.


all good just need to pull solar panels back into place



nice even bed all round 
finished and what a job


Give me some shade

 yawninning  unwrap the beast  tree places the brackets need to sit dry fit to start the measure, measure and measure again. the end of the ...